Question: What do you put on the wall behind a wood stove?

A fireback is a cast iron object that can be placed behind a stove to help protect a wall. Firebacks are also very decorative features that can help to enhance the look of your stove.

Do you need wall protection for wood stove?

Protection must be provided for combustible wall, ceiling, and floor materials near the stove and stovepipe as well as where the stovepipe passes through or near combustible walls, ceilings, and other materials.

Is drywall OK behind a wood stove?

Drywall is combustible and not a suitable material either for use behind the wood stove or for use underneath tile. Removing it from the wall behind the wood stove allows you to install cement backerboard instead. Cut right through the drywall using a drywall saw.

What kind of board do you put behind a wood stove?

Safe wood stove installations require a heat shield that will prevent heat from the wood stove from creating a fire hazard in the building materials that form the exterior wall. Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application.

What can I use to protect my walls from heat?

A brick, stone or tile heat shield is equally effective but in a different way. These dense materials absorb lots of heat and gradually release it as air circulates around them. The simplest masonry heat shield is a cement board that is separated from the wall by one-inch ceramic spacers.

Can I vent a wood stove through the wall?

Venting is an important component of all stoves. For instance, wood-burning stoves will always be vented through the roof of your house, but pellet-burning stoves can be vented vertically through the roof, or horizontally through the wall to the outdoors.

What is considered a non-combustible wall?

While wall coverings are frequently non-combustible — like tile, brick, stone, metal — the underlying structure often contains wood, paper faced drywall or insulation, and other materials that could catch fire if enough heat were to be transmitted through the non-combustible wall covering.

What is the best material to put behind a wood stove?

Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room. The NASD explains that any area within 36 inches of the stove in all directions should be covered.

What material do you put behind a stove?

Granite, stone and other natural or composite materials are also commonly used in backsplashes, whether in tile form or as larger pieces. These higher-end materials will mean an increase in budget, but also a stunning and long-lasting stove backsplash. Stainless steel is another popular option for stove backsplashes.

Can you put ceramic tile behind a wood stove?

ANSWER - Ceramic tile behind a woodstove works very well as long as its installed correctly over the right type of substrate. Its important, though, that the tile is attached to a surface thats not affected by heat. Its best to use a concrete substrate like a mortar bed or a cementitious backer unit.

How do I protect my walls around the sink?

A backsplash is a vertical extension to a counter—typically a kitchen or a bathroom counter. A backsplash can extend a few inches high or it can go as high as the ceiling. The purpose of a backsplash is primarily functional. It protects the wall behind the sink against water damage from inadvertent splashing.

How do you protect a wall behind a stove?

Investing in some form of splatter guard can keep your walls safe.Cover your frying pans with a splatter screen while you cook. Stand a splatter guard on your stove behind a griddle pan while you use it. Tape wax paper to your walls while you cook if you prefer not to buy any new kitchen equipment.

Can you vent a wood stove through a window?

The stovepipe, also called a chimney connector, is the component that usually connects the chimney to the stove. When placed through a window, it is meant to exhaust the fumes out of the house. These pipes are often present on wood stoves and an improper installation can be a fire hazard.

Is cement board considered non-combustible?

Yes, HardieBacker® 1/4 Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace.

Is drywall considered non-combustible?

Because the Building Subcode allows such composite materials, gypsum wallboard can be considered noncombustible as defined by the Building Subcode. Therefore remember, under the Mechanical Subcode, gypsum wallboard is classified as a combustible material.

What is considered a non combustible wall?

While wall coverings are frequently non-combustible — like tile, brick, stone, metal — the underlying structure often contains wood, paper faced drywall or insulation, and other materials that could catch fire if enough heat were to be transmitted through the non-combustible wall covering.

Do you finish drywall behind cabinets?

To protect the drywall and for a professional finish, we recommend painting behind kitchen cabinets.

Can you put wallpaper behind a stove?

Textured and/or porous wallpaper in the kitchen will collect grime and absorb cooking odors. Hanging wallpaper behind cooking areas increases the possibility of stains from cooking spatters and other damage. Moisture around sinks can cause the paper to come loose.

What is the best tile to use behind a wood stove?

Installing tile behind a wood stove provides heat protection, color, texture and warmth to the area. Ceramic or clay tiles provide the most protection and are moderately easy to install.

Do you put tile behind stove?

You need a backsplash behind the stove to protect from grease and cooking splatter that could damage the surface behind the stove. The backsplash should be made of durable, nonabsorbent, and easy to clean material that will not discolor easily.

Say hello

Find us at the office

Hostler- Pertzborn street no. 57, 67563 Kigali, Rwanda

Give us a ring

Anterio Ruebush
+29 780 790 988
Mon - Fri, 8:00-17:00

Contact us