Question: Can I connect a turntable to an AV receiver?

If your receiver does not have a phono input, dont worry – many turntables have their own built-in preamp. (You can verify this in the owners manual.) As long as this is the case, you can use any receiver input, such as the ones labeled “Line,” “Audio,” “CD” or “Auxiliary.”

Can you put your turntable on your receiver?

Most stereo receivers have the transformer on the left side, so putting the turntable on the right side of the receiver is recommended. We strongly recommend not placing your turntable on top of your receiver - this can cause buzz issues and may also prevent your receiver from getting proper air flow.

How do I connect my turntable to my home theater system?

You just plug your red and white double-ended cables into the phono input on your receiver and you are good to do. Just make sure if your turntable has a preamp built in and so does your turntable, you do not plug it into the phono input! Instead, plug it into one of the other red and white inputs and you will be fine.

Can you connect a turntable to a surround sound system?

However, most modern turntables are capable of producing an acceptable stereo or even a surround sound. This means they can be connected directly to a home theater system. A turntable connects to the home theater system using RCA cables. The RCA cables are usually included in the turntable package.

How do you hook up a turntable to a receiver without phono input?

How to Connect a Turntable to a Receiver Without a Phono InputStep 1: Turn Power Off. Turn power off to your receiver, turntable and preamp. Step 2: Connect Turntable to Preamp. Step 3: Connect Preamp to Receiver. Step 4: Ground Turntable to Preamp. Step 5: Turn Power On.

What should I put under my turntable?

I use industrial anti-vibration pads under my turntables. They are made by a company called Diversitech and are very inexpensive, and come in different sizes. I use the ones with the blue EVA material in the center.

Is it bad to have speakers next to turntable?

BAD VIBRATIONS If you put speakers near to or on the same shelf as your record player the vibration of the speakers will undermine the record players ability to do its job well. So try to put your turntable on something small thats not close to the speakers, and likewise put your speakers on stands or wall brackets.

Can I play my turntable through my soundbar?

If your turntable is equipped with a built-in preamp, you can directly connect your turntable to any soundbar input that is labeled AUX, or another name such as LINE, Audio, etc. You can do this using a phono cable/RCA cable.

Do turntables have HDMI?

It has an HDMI-ARC connection so you cant use it to get audio into the beam with a converter, adapter or switcher. Option 1 - Connect the turntable to the TV AV input. If the TV wont let you switch to that input you will need to connect the composite RCA video output of another source to trick it.

Can I use a soundbar with a turntable?

If your turntable is equipped with a built-in preamp, you can directly connect your turntable to any soundbar input that is labeled AUX, or another name such as LINE, Audio, etc. You can do this using a phono cable/RCA cable.

How do you connect a turntable to an amplifier?

2:254:15How to Connect Turntable to Phono Preamp or Integrated AmplifierYouTube

What if my receiver doesnt have a phono input?

If your receiver does not have a phono input, dont worry – many turntables have their own built-in preamp. (You can verify this in the owners manual.) As long as this is the case, you can use any receiver input, such as the ones labeled “Line,” “Audio,” “CD” or “Auxiliary.” 5.

Can I use aux input for phono?

If you have a phono input, plug your turntable in there – you wont need a phono pre-amp. If thats the case plug the turntable into a spare input, like the auxiliary or aux ports. Dont plug it into a phono input or you may blow your speakers up.

How far should a turntable be from a speaker?

Speakers should be placed so that their initial distance between them is 150cm MINIMUM. Mutual distance is always calculated from the middle of the bass unit on one speaker to the middle of the bass unit on the second speaker.

Can you Bluetooth a turntable to a soundbar?

Regular turntable and Bluetooth adapter Almost all soundbars have Bluetooth connectivity, but most turntables do not. If you have a regular turntable and soundbar without an analog AUX input, a Bluetooth adapter is a perfect way to connect them. Thus, it transmits the music signal to the soundbar wirelessly.

How do I connect my Bluetooth soundbar to my Bluetooth turntable?

If your turntable has a built-in phono preamp and the PHONO/LINE switch is set to LINE you simply connect the turntable directly to the AUX input on the soundbar. If your turntable doesnt include a built-in phono preamp, then you will need to add a separate phono preamp between the turntable and the soundbar.

Can you connect a turntable to a TV?

You can connect powered speakers to the turntable. You can try to connect it to your TV using the audio connection of an unused input. The TV may not work without video as well so you could use the video out of another device into the corresponding video connection for the same input.

Can you plug a turntable into a soundbar?

If your turntable is equipped with a built-in preamp, you can directly connect your turntable to any soundbar input that is labeled AUX, or another name such as LINE, Audio, etc. You can do this using a phono cable/RCA cable.

Do modern turntables need an amplifier?

Yes. A turntable must be connected to an amplifier as the output signal is not strong enough to drive speakers. However, there is an exception as a lot of record players have pre-amplifiers built-in already.

Is a preamp necessary for a turntable?

If you want to hook your record player up to external speakers or audio systems, you need a preamp. Some turntables contain internal preamps. So do some of the components you might want to connect to your turntable, like a receiver or amplifier. If that is the case, you wont need to buy an additional preamp.

Do I need a preamp if my receiver has a phono input?

Technically speaking, the simple answer is no. A phono input on a receiver has a little amplifier in it that takes the exceedingly low level of your cartridge and amplifies it to normal line level (the same electrical level as a CD Player or other component).

Say hello

Find us at the office

Hostler- Pertzborn street no. 57, 67563 Kigali, Rwanda

Give us a ring

Anterio Ruebush
+29 780 790 988
Mon - Fri, 8:00-17:00

Contact us