Question: What are toilet dimensions?

Standard toilet dimensions are typically between 28–30 deep, roughly 20 wide, between 27–32 high, and have a rough-in between 10–14. Now you can find the perfect toilet.

What are the rough in dimensions for a toilet?

12 inches The standard rough-in is 12 inches, though you may encounter 10-inch and 14-inch rough-ins in older homes. You should find the rough-in measurement in the new toilets product information.

Are toilets all standard size?

Standard toilets will measure between 15 and 17 inches, while chair style toilets can be up to 17 inches. Standard toilet rough in dimensions are 12 inches but can be anywhere from 10 to 14 inches in some cases.

What is the width of a toilet?

Most codes require at least 15 inches (measured from the center of the toilet) from any side wall or obstruction and not closer than 30 inches center to center to any other sanitary fixture. (The NKBA actually recommends 32 inches.) There should be at least 24 inches of clear space in front of a toilet or bidet.

Are all toilet bases the same size?

As far as the overall size of toilet itself, getting the proper rough will allow the toilet to fit the space. Toilet sizes vary beyond the rough though. Round bowls dont project out as much as elongated, and then there are variations within the round and elongated categories as well.

Are all toilet bolts the same size?

There are three possible measurement distances you can get from the wall to the toilet bolt: 10 inches, 12 inches, or 14 inches. The most common is 12 inches. In plumbing terminology, this is called a 12-inch rough. Sometimes these measurements are not exact.

What is the standard height of a toilet?

around 14 1/2” Standard toilet height is around 14 1/2” from the floor to the bowl rim, without a toilet seat. In recent years toilet bowl height has increased to assist people with sitting and standing up, for the benefit of taller people, and those with physical handicaps and/or the elderly.

Why do men prefer elongated toilets?

For elongated toilets, the consensus seems to be that they are much more comfortable for adults. The shape of the bowl is much better for men as well, giving them extra space where they need it most. Men also appreciate the sloped angle inside the bowl that helps prevent splashback.

What is the point of an elongated toilet?

An elongated toilet bowl is oval-shaped and about 2 inches longer than a round toilet, which is almost circular. Elongated toilets therefore offer a bigger surface area to sit on and are hence more comfortable than round toilets.

How much space do you need between toilet and vanity?

a 30″ NKBA designers recommend a 30″ clearance between the front edge of a fixture, such as a vanity or toilet, and any other fixture or wall. The building code allows for a minimum of 21″.

What is the size of a toilet base?

The standard flange size is 3 inches in diameter. The standard plumbing hole for a toilet is the flange, the waste pipe that fits through a hole in the floor. Comprised of two parts — a pipe and a ring bolted to the floor — the flange will connect the toilet to the households waste line.

What size are standard toilet bolts?

2 ¼” long Standard Johni-Bolts are 2 ¼” long. They are also available in an extra-long length, which is 3 ½”.

What size bolts hold a toilet down?

A set of replacement toilet caps typically includes two different sets of threaded adapters: 1/4 inch and 5/16 inch. The 1/4-inch size is the more standard.

What is the difference between a chair height toilet and a comfort height toilet?

Chair and comfort height are two different terms but they refer to a toilet of the same height. Chair height is the common term for all toilets with a height that is at least 17 inches while comfort height is a brand-specific term, for chair heights.

How high is Kohler comfort height?

Heights vary enough to be noticeable. Most often, they fall somewhere between 15” and 19”, with standard toilets coming in under 17”. However, chair height toilets, what Kohler refers to as Comfort Height® toilets, measure 17” or more.

Do men prefer elongated toilets?

For elongated toilets, the consensus seems to be that they are much more comfortable for adults. The shape of the bowl is much better for men as well, giving them extra space where they need it most. Men also appreciate the sloped angle inside the bowl that helps prevent splashback.

Is a round or elongated toilet better?

Most people find elongated toilet bowls to be more comfortable, but in a small bathroom, a round bowl can save space. Elongated toilet bowls measure up to 31 from the wall, while round fixtures max out at 28. Because round bowls are less expensive than elongated bowls, they save a few dollars, too.

Say hello

Find us at the office

Hostler- Pertzborn street no. 57, 67563 Kigali, Rwanda

Give us a ring

Anterio Ruebush
+29 780 790 988
Mon - Fri, 8:00-17:00

Contact us