Best answer: Media State Disconnected Ethernet Cable unplugged I have had the same problem and spent days scouring Google and trying any suggestion that I could find. Last night I found a post from 2002. It seemed ridiculous but I gave it a shot . Hello, I'm not exactly sure how to describe it, but no matter how many times I unplug and replug my network cable, my broadband router still registers that it's not connected. I've tried resetting the router, reinstalling both the broadband and the atheros wireless card on my laptop(but there doesn't seem to be anything wrong with that .), and, as said, replugging it.
Hello, I'm not exactly sure how to describe it, but no matter how many times I unplug and replug my network cable, my broadband router still registers that it's not connected. I've tried resetting the router, reinstalling both the broadband and the atheros wireless card on my laptop(but there doesn't seem to be anything wrong with that...), and, as said, replugging it. I'm kind of at a loss; I'm pretty computer savvy but can't really figure this out.
My dad said he's going to rewire it to see if that works, but if it doesn't, does that just mean we need to get a new one? Please help. • Media State Disconnected • Ethernet Cable unplugged I have had the same problem and spent days scouring Google and trying any suggestion that I could find.
Last night I found a post from 2002. It seemed ridiculous but I gave it a shot. PROBLEM SOLVED. • 1.) Shut dowm your PC. • 2.) Unplug the power cord.
• 3.) If you have a laptop, remove the battery as well. • 4.) Walk away from the problem for at least 30 minutes. • 5.) When you return, reconnect battery and power cord. • 5.) Start as usual. • 6.) If this solves the problem, take 20 minutes and post this to all of those message boards that you didn't find the solution to.
This fix appears to work for any OS/MOBO/NIC. What causes it? I don't know. Have a great day! :) You are so right on! I have an XP SP2. Last eve there was a severe thunderstorm. This am I saw this strange icon on the lower right of the taskbar, with an "x," saying that a network cable was unplugged. I called AT&T, back and forth, as the Versalink was lighting up and my lap was working, but no workgroup connection.
They offered to replace the modem/router with a new one. I later went out and bought a new CAT5, hoping that is was only the pins. Still failed to cure. Was ready to buy a new NIC and disable the one built into my motherboard (SIS 630/730, trouble-free for the past 6 years).
Read your comments first and said "What the hell," and followed your advice. IT WORKED!!!!!! I don't understand it, but IT WORKED!!!!!!
Thank you for sharing! Magic! L1r, your simple solution worked for me too, thanks! So glad I found it relatively early in my search. This mysterious ethernet port problem suddenly appeared with my PC running Windows XP and MS Office 2007.
Other computers maintained their network connections fine but mine insisted a "network cable was unplugged" when it wasn't. Now back in action. Wow, this solved my issue as well. PC has been off for about a month but the network cable was connected.
Powered it on with this new error. Swapped cables with known working devices, disabled/re-enabled the device, rebooted, uninstalled and reinstalled the device, and still complaining about the network cable being unplugged when the lights on the back of the ethernet card and on the hub were displaying active. This happened to two systems placed right next to each other in our lab This solution sounded too easy, but it resolved it!
Unfortunately didn't work for me. Like Vin we had a bad thunderstorm, lightening hit a tree in the front yard. I had turned off all computers in house, but hadn't unplugged the network cables.
2/4 computers had message 'network cable unplugged'. Used laptap to confirm that the network cable and network were functioning - plugged in and laptop connected immediately.
Took desktop downstairs to where one was working and plugged in to that cable - still got "network cable unplugged message". Replace NIC in one computer for $10 and it worked.
Now with computer upstairs found this thread. Tried unplugging for 1 hour, resetting the Link Speed & Duplex, no help. Still get same message. Have to assume the network connection on the MOB is blown. Under Device manager it is listed as working properly, but can't connect. Will try adding NIC. I had this problem with my Acer Aspire One netbook - I simply swapped out what seems to be a newer type of network cable and pluged it into an old RS45 cable I had.
Worked straight away. Now I don't know if there are "newer" or different cables but the one I plugged it into and it worked was definitely an "old" cable, no fancy colours like red or yellow - bog standard grey. Hope that helps someone. I had the same issue on a Latitude D600 after reinstalling the OS. After many days of frustration I found that the issue is due to a duplex mismatch between the internet router and the 570x controller.
The default setting on the controller is set to Auto but for some reason this causes the network cable not to be detected, after changing the setting to a specific speed and duplex like lets say 100 full duplex the cable was detected and the controller started working. If your are having this issue try playing around with the duplex settings on the controller.
Open device manager -Right-click My Computer and select Properties. -System Properties window should open, click on the Device Manager button under the Hardware tab.
Device Manager should now be open. -Find the controller under the Network Adapters. -Double click the controller to open its properties window. -click on the Advanced tab (This is where you can change the speed and duplex settings).
-Select Speed & Duplex on the left side of the window (you should see its current setting (Auto)towards the right side of the window on the Value drop-down). - Click on the drop-down and select a setting other than Auto (Try 100 Mb Full) and then click OK to close the window. Right after changing this setting the controller should detect the cable righ away. Let me know if this worked for you....
After WEEKS of having my internet connection unavailable after my Win 7/Dell computer woke up from sleep/hibernate, I have used this tweak and it worked! After hibernate, my internet connection (Ethernet cable plugged into the router/firewall) would be out.
I tried the network troubleshooter, and it kept giving me the same answer...network cable unplugged. I tried the suggestion to unplug/re-plug, and that didn't work...and was a real pain too.
Like most, my cable connections are at the back of all the equipment. Since a full reboot always solved my problem, I knew that there was a setting somewhere that could solve the issue. I set my network card as described by Alexandro010, and have not had a problem with my internet connection being down for a couple of weeks. I sincerely hope this helps others too Max Hmm... I had the same problem. Windows 7 Resolution: 1. Power down the computer 2. Start the computer in BIOS 3.
Reset BIOS to defaults 4. Power down the computer 5. Unplug the power cable 6. Press and hold the power button (with the cable disconnected) for about 10 seconds 7. Replug the power cable 8. Power on the computer
best fish dating network cable unplugged - Networking Cable Unplugged
While there are very straightforward error messages, unfortunately the Network Cable Unplugged error message doesn’t fall into this group.
There are three basic groups of reasons for this message and each of these groups has several branches. Here they are: 1. Physical interruptions to the connection. A very common reason for the Network Cable Unplugged error message is a physical interruption to the connection. Actually, this is the most obvious reason for the message – a network cable is unplugged.
In some cases even if the cable is plugged, it could be the wrong cable, or the right cable might not be plugged in properly, and still you will be getting the Network Cable Unplugged error message. Faulty hardware/faulty port on properly functioning hardware are also common. Finally, if there are problems in your provider’s network, you could be getting this message.
2. Software issues. Messed up drivers and software conflicts can also lead to the Network Cable Unplugged error message. In other cases you will be getting the error message instead, and you will still be unable to connect to the Internet. 3. Configuration settings.
Sometimes your configuration settings can lead to this message. If you have set the network to go down after a specified interval of inactivity, this could result in the Network Cable Unplugged error message even though everything is properly connected. Image Credit: How to Fix the “Network Cable Unplugged” Error Message Here are some suggestions how to fix the Network Cable Unplugged error message: 1.
Make sure the cable is connected properly. This is the simplest approach and very often verifying that the cable is connected properly is all it takes to fix things. 2. Check with an alternative cable, network adapter, or router.
If you suspect the cable, network adapter, or , just replace them with functioning ones and see if the problem persists. 3. Update the driver of the adapter. If it is a software issue, try updating the driver of the network adapter. 4. Run a patch. For some software issues, such as Winsock problems, there is an . 5. Check your connection settings. If you have set your connection or network adapter to go down after a specified interval of inactivity, change this so that you are always connected.
6. Contact your provider. One more step to take in an attempt to fix the Network Cable Unplugged error message is to contact your provider. If there is something wrong in the provider’s network, even if everything is working properly on your side, you will still be unable to connect.
The fixes listed here aren’t a complete list. There are many more cases and fixes in addition to the ones listed above, but these are just the most common and quickest ones. This is why you should start with them and see if they help. Also, if you are using a router, check its documentation because with routers, things can be further complicated.
by fully powering down, waiting a few seconds, and then turning the computer back on. If you're on a laptop, take the extra step of removing the battery, if possible, and walking away for 10 minutes.
Just unplug the laptop from power and remove the battery. When you get back, reattach the battery, plug the laptop back in, and start Windows again. Check both ends of the Ethernet cable to ensure that they are not loose.
One end is connected to your computer, and the other is connected to the main network device, probably a . If this doesn't help, try testing for a faulty cable. Instead of buying a new one outright, plug the same cable into a different computer or temporarily swap out the Ethernet cable for a known good one.
to a newer version if one is available. If it's already running the latest version, consider uninstalling and reinstalling the driver or . It might seem impossible to check the internet for outdated network drivers when the network can't reach the internet. However, some such as and can do just that. Use or Network and Sharing Center (via ) to change the Ethernet adapter's Duplex settings to use a "Half Duplex" or "Full Duplex" option instead of the default Auto selection.
This change can work around the technical limitations of the adapter by changing the speed and timing at which it operates. Some users have reported having more success with the Half Duplex option, but note that this setting lowers the maximum total data rate that the device can support. To get to this setting for your network adapter, go to the device's properties and find the Speed & Duplex setting within the Advanced tab.
How to connect internet LAN (window xp)